ATTO Technology FC-3321 Einstellungsanleitung PDF herunterladen (Seite 32)

Version 3.3 Upgrade Notes

14. Click Open in the Locate File Window. You will receive an incorrect

list of devices in the Select a Device Driver Window. The Phantom

Device has changed from a SCSI and RAID device to a System device.

Step 15 only applies to the first Phantom Device you upgrade on the

system. After you upgrade the first device, on systems with multiple

Phantom Devices, subsequent devices will display the correct list indicated

in step 14.

15. Click Back.

16. Repeat steps 10 to 14.

You should now receive the correct list in the Select a Device Driver

window. Select the Phantom Device.

17. Click Next in the Select Device Driver Installation window.

18. Click Finish. The driver version of the Phantom Device should be v1.0

in the Properties window you opened in step 5.

19. Close the Properties window.

20. Repeat steps 5 to 19 for each Phantom Device listed.

Upgrading the ATTO Fibre Channel Driver

Use the following instructions to upgrade the ATTO Fibre Channel driver

in your Windows 2000 or Windows XP Fibre Channel client.

To install the ATTO Fibre Channel Driver on a Windows 2000 or

Windows XP client:

You must be logged in as an Administrator to upgrade drivers.

1. Insert the MediaNetwork CD-ROM into the Windows 2000 or XP

client CD drive. The MediaNetwork v3.3 Installation window opens

after approximately 1 minute.

2. Click the Exit button to close the installation window.

3. Right-click My Computer on the desktop and select Manage.

4. The Computer Management window opens.

0578801A_UP.fm Page 32 Tuesday, May 6, 2003 4:47 PM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Keine Kommentare

ATTO Technology FC-3321 Einstellungsanleitung Seite 32