
AVoption and AVoption XL Guide34
To delete the Movie Track:
1 Select the track by clicking on the Track
Name button in the Edit window.
2 Choose File > Delete Selected Tracks.
To clear all video from the Movie Track:
■ Choose Movie > Clear Movie Track.
Setting S-Video or
Component Output
(AVoption XL only)
The Meridien I/O Box can only output
from either S-Video or Component out-
puts. This choice must be made in the soft-
ware, and echoed in the physical connec-
tions you use to output signals.
To select component video outputs in
AVoption XL:
1 On the Movie Track, click the Track Op-
tions pop-up. See Figure 4 on page 33.
2 Use the Video Output pop-up menu to
select the outputs you would like to use:
Component or S-Video.
Movie Track Options
The Movie Track can be viewed in frames or
in blocks. Frames allow you to see an over-
view of the actual video content in a ses-
sion. Blocks allow you to see where clips in
the original project begin and end, and the
names of clips.
Frames
In Frames mode, video data is displayed as
pictures in the Movie Track. These pictures
are computed based on the video image,
and scale according to your track zoom set-
tings and track height. They do not provide
a frame-accurate reference, but allow you
to easily find a scene or sequence in the
Movie Track.
Frames do not display properly if you
change zoom settings during playback.
Black frames are drawn until playback is
stopped. You should stop playback before
changing zoom settings if you want to view
frames.
Blocks
Blocks mode displays the Movie Track as
blocks of compositional data. Blocks are
outlined wherever clip boundaries existed
before export from the original program.
Names from the original clips are retained.
For example, two clips edited together
without any transitions or effects, and
Movie Track in Frames mode
Kommentare zu diesen Handbüchern