Atto-technology FastStream SC 5700 Bedienungsanleitung PDF herunterladen (Seite 36)

ATTO Technology Inc. FastStream SC Installation and Operation Manual

7.0 Modify Storage

Use the ExpressNAV Storage Manager to replace a failed drive, add new drives or redesign RAID configurations.

You may modify various aspects of storage using the

Manage Menu

found by clicking on the tab on the left

hand side of the ExpressNAV Storage Manager. Be

cautious when deleting storage or rearranging storage

configurations because data could be compromised or

lost.

The ExpressNAV Storage Manager takes you step by

step through many procedures which allow you to

modify your storage and RAID configurations. Read all

notes and cautions carefully as you go to ensure the

best performance and use of your storage.

When you initially set up the FastStream, replace a

failed drive or add new drives to the FastStream,

perform drive initialization and verification to these

drives.Refer to

Ensure Drive Integrity

on page 11.

Many of these procedures are only available on

unallocated storage which is not currently part of a

RAID group, not designated as a Hot Spare (refer to

FastStream process: adding or removing Hot

Spares

on page 34

)

, or was offline when you initially

set up RAID configurations.

Preliminary steps

Begin with these steps, then choose the process you

wish to use.

Note

An unallocated drive or unallocated storage is

storage which is not part of a RAID group, not

designated as a Hot Spare or is offline.

1 If you are not already in the ExpressNAV

Storage Manager, type the IP address of your

appliance, click

Enter Here. In the box

provided,

type in your user name and

password. Click

OK.

2The

Health and Status Monitor page appears.

3 Click on the

Manage button on the left hand

side of the ExpressNAV Storage Manager.

4The

Manage Menu page appears. From the

Select User Process box, select the operation

you wish to perform.

RAID group processes

You may create or delete RAID groups, change RAID

group levels, rebuild RAID groups or modify RAID

group mapping or partitions.

Creating RAID groups

1 Follow the instructions in Preliminary steps

above and click on the

RAID Groups arrow

from the

Select User Process box.

2 Click on

Create RAID Group.

3 Follow the directions as found in Selecting an

application on page 14 or Creating a custom

setup on page 16.

Deleting RAID groups

1 Follow the instructions in Preliminary steps

above and click on the

RAID Groups arrow

from the

Select User Process box.

2 Click on

Delete RAID Groups.

3 Click on Next.

4 If you decide to delete Hot Spares, click on the

appropriate radio button. (Refer to FastStream

process: adding or removing Hot Spares on

page 34.)

5 Click on each RAID group to be deleted.

6 Click the

Delete button.

7 When you have selected all the groups you

wish to delete, click

Commit.

8 A warning box appears.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 72 73

Kommentare zu diesen Handbüchern

Keine Kommentare

Atto-technology FastStream SC 5700 Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Atto-technology FastStream SC 5700