ATTO Technology UL3S Bedienungsanleitung PDF herunterladen (Seite 10)

Pinnacle Systems - CineWave

• When using CineWave with any VideoRaid disk array, make sure that no Iomega extensions are loaded.

• The CineWave benchmark utility does not provide accurate test results with fail-safe (RTR/RTRX/RTS) VideoRaid units.

Click here for Pinnacles’ CineWave Configuration and Qualification

document

RAID 0 VideoRaid Models

Compatible VideoRaid

RAID 0 Models

Operating System

Compatibility

Product

scsi RT LP OS 9 OS 10.2.x

Notes

CineWave SD ● ● ● Use an Adaptec 29160 or 39160 SCSI host adapter.

CineWave

RT/RT Pro

● ● ●

Requires two units striped together with SoftRAID v2.2.2 on an

Adaptec 39160 SCSI host adapter.

CineWave HD ● ● ●

Requires two units striped together with SoftRAID v2.2.2 on an

Adaptec 39160 SCSI host adapter

Fail-Safe VideoRaid Models

Page 9 of 10

Compatible VideoRaid

Fail-Safe Models

Operating System

Compatibility

Required MST Setting

Product

RTR RTS RTRX OS 9 OS 10.2.x OS 9 OS 10.2.x

Notes

CineWave SD ● ● ● ●

Option 1

(default)

Use an Adaptec 29160/39160

CineWave

RT/RT Pro

● ● ● ● ●

Option 1

(default)

Option 1

(default)

OS 9: Use an Adaptec

29160/39160 SCSI adapter.

OS X: Use an Atto UL3S/UL3D

SCSI host adapter. Must have

VideoRaid x148 firmware

or better.

CineWave HD ● ● ● ● ●

Option 7

(Click here for

instructions to

change the

default MST

setting)

Option 1

(default)

Requires (2) RTR /RTS units or a

10-drive RTRX striped across a

dual channel SCSI adapter.

OS 9: Use an Adaptec 39160 and

SoftRAID

v2.2.2 to configure a

stripe set.

OS X: Use an Atto UL3D and Atto

Express Stripe v1.2 to configure a

stripe set. Must have VideoRaid

x148 firmware

or better

1 2 ... 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

ATTO Technology UL3S Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern